VanityPSU
Posted by AP
|
VanityPSU September 14, 2023 02:27PM |
Hello all,
It has been a while since we announced something new last time, but despite the slower summer holiday season we are happy to show you the VanityPSU !
It is a very low-noise linear power supply unit designed specifically for the VanityPRO, but is can be also used as an universal linear power supply. It has three independent power rails, two with 5V and one with 12V output. Each 5V rail has two USB connectors USB-A and USB-C and each connector has its own secondary regulator. The 12V output has standard 2.1mm DC jack. All outputs are fully protected against overvoltage, overcurrent and short circuit. It comes in an enclosure design-matched to the VanityPRO.
The unique feature of our power supply is two stage linear regulation and each output regulated separately. Both regulator stages are discrete designs, with the second one being extremely low-noise, not seen in stand-alone power supplies before.
If used to power the VanityPRO the additional 5V outputs can be used to power other HDMI devices such as splitters or selectors, while the 12V output can power a DAC, network switch or other equipment requiring 12V/1A power input.
The AC input can be easily switched between 230V/115V AC. Last but not least, the brightness of the front panel LED can be manually adjusted to match indicators of other equipment.
The VanityPSU will be available through our distributors and sellers in October/November 2023.
It has been a while since we announced something new last time, but despite the slower summer holiday season we are happy to show you the VanityPSU !
It is a very low-noise linear power supply unit designed specifically for the VanityPRO, but is can be also used as an universal linear power supply. It has three independent power rails, two with 5V and one with 12V output. Each 5V rail has two USB connectors USB-A and USB-C and each connector has its own secondary regulator. The 12V output has standard 2.1mm DC jack. All outputs are fully protected against overvoltage, overcurrent and short circuit. It comes in an enclosure design-matched to the VanityPRO.
The unique feature of our power supply is two stage linear regulation and each output regulated separately. Both regulator stages are discrete designs, with the second one being extremely low-noise, not seen in stand-alone power supplies before.
If used to power the VanityPRO the additional 5V outputs can be used to power other HDMI devices such as splitters or selectors, while the 12V output can power a DAC, network switch or other equipment requiring 12V/1A power input.
The AC input can be easily switched between 230V/115V AC. Last but not least, the brightness of the front panel LED can be manually adjusted to match indicators of other equipment.
The VanityPSU will be available through our distributors and sellers in October/November 2023.
|
Re: VanityPSU November 16, 2023 11:00AM |
Sorry, only registered users may post in this forum.